Clips, Snaps & D-Rings

Bolt snaps, double enders, D-rings, split rings, tri-gliders and hose retaining clips: the small hardware that keeps a torch, stage, gauge or camera exactly where you left it. We carry XDEEP, Nautilus, Lumb Bros, Beaver, Cetacea, Divesoft and Miflex, in stainless steel, marine bronze and webbing-mounted patterns. If you are not sure what suits your harness, bring it into the shop and we will work it out with you.

Diver in trim underwater with hoses and gauges clipped to the D-rings on their BCD harness

  • Expert advice

    Talk to divers who use the kit we sell.

  • Servicing and repairs

    Regulators, cylinders, drysuits, BCDs and computer batteries.

  • Rutland dive centre

    A real shop in Oakham, with training and pool sessions.

  • UK delivery

    Posted across the UK. Ask about lead times on special orders.

Filter
    NA-CB-001
    Nautilus Coach Bolt Technical Diving - Silver
    Nautilus
    £11.95
    Nautilus SS D- Ring Holder for Hose Clamps | Dive Rutland
    Nautilus SS D- Ring Holder for Hose Clamps
    Nautilus
    £3.95
    Highland 90 Degree Welded D-ring - HL909
    Highland 316 SS 90° Billy Ring
    Highland
    £8.95
    DIRZone Adjustable Buckle Set - 65107
    DIRZone Adjustable SS Belt Buckle ( 1 Set )
    DIRZone
    £10.96

    What clips, snaps and D-rings are for

    Bolt snaps and clips are the attachment points of a dive rig. They give a secure, repeatable home for the kit you need to hand - dive lights, cameras, gauges, spools and stage cylinders - so it stays streamlined against your body instead of dangling where it can snag or get damaged. Most bolt snaps use a spring-loaded gate that can be worked one-handed, which matters when you are wearing thick gloves in cold UK water.

    Single ended, double ended and D-rings

    A single ended bolt snap has one spring gate and a solid eye at the other end, so it is fixed to the item you want to clip off using a split ring, line or webbing. A double ender has a gate at each end and joins two points together, which is why it turns up on stages and on anything that needs to come off again. D-rings come fixed, bent, low profile, sliding and welded onto belt stops; which pattern you need depends on the harness or wing you are fitting them to.

    Materials vary - check the product page

    Not everything in this collection is stainless steel. The range includes stainless steel snaps, rings and buckles, marine bronze bolt snaps and snap hooks, and clips built on nylon webbing. Those materials do not behave the same way in salt water, so read the material on the individual product page and follow the manufacturer specification rather than assuming.

    Looking after them

    Rinse hardware in fresh water after every dive, particularly after salt water, and work the gate through its full travel while it is still wet. A snap that has gone stiff or gritty is telling you something. Anything that will not open cleanly with one gloved hand is worth replacing rather than persevering with.

    Rigging is personal

    There is no single correct way to rig a set of clips, and what works on a single-cylinder recreational setup is not what works on a twinset or in sidemount. If you are changing configuration, come and talk to us, or look at our diving specialities if you are heading towards technical or overhead diving.

    Frequently asked questions

    A single ended snap has one spring gate and a solid eye at the other end, so it is fixed permanently to a piece of kit with a split ring, line or webbing. A double ender has a gate at each end, so it joins two points together and can be taken off again.
    No. The collection includes stainless steel snaps, rings and buckles, marine bronze bolt snaps and snap hooks, and clips built on nylon webbing. Corrosion behaviour is not the same across those materials, so check the material on the individual product page and follow the manufacturer specification. If it matters for how and where you dive, ask us before you buy.
    It depends on what you are clipping off and what you are wearing on your hands. A larger gate is easier to operate in thick wet gloves or drygloves; a smaller snap sits tighter against the body. There is no single right answer, which is why we keep them in the shop to handle. Trying one with your own gloves on tells you more than a size chart will.
    Hose retaining clips hold low and high pressure hoses together so they route tidily instead of flapping. Several patterns are in this collection and they are sized for the hoses they clamp, so check the manufacturer specification for the hose diameters a clip is made for. If you are not sure, bring the regulator set into the shop and we will match it up.