2 x battery Li-Ion 21700 with USB Type C charging port
1 x pouch for storage batteries
1 x USB charger
1 x USB type-C cable
2 x flexible arms with mounting for LED STINGRAY VIDEO MARK II torches
1 x tray for camera and arms
1 x carrying a plastic box
LIGHT AND COMPACT
The LED STINGRAY VIDEO MARK II is an all-around, compact and powerful dive light.
It weighs only 137g (210g with battery) and is only 12cm long!
INCREDIBLE AMOUNT OF LIGHT
In the LED STINGRAY VIDEO MARK II, three high-performance next-generation CREE LEDs are used.
Due to this - and thanks to the implemented electronics - the torch emits a maximum of 1300 lumens light output in a cool white colour temperature.
The light is evenly emitted in a wide, over 120-degree beam angle.
LONG OPERATING TIME
The STINGRAY MARK II LED torch is powered by a 21700 Li-Ion battery that provides long runtime (about 2 hours) and is characterized by a long lifespan (up to 500 charging cycles with up to 75% capacity) as well as a high level of safety. Due to the built-in PCM, the battery is protected against overcharging, over-discharge, and short-circuit.
CHARGING STATUS AND CONVENIENCE OF USE
The battery is equipped with a very convenient charging system that uses the built-in USB-C port. The LED STINGRAY VIDEO MARK II set comes with two rechargeable 21700 Li-ion batteries and a USB-C cable, which can be used to charge the batteries from any power source (charger, power bank, laptop, computer, or a car USB charger).
The batteries can also be charged with chargers dedicated to standard 21700 Li-Ion batteries.
Additionally, there is a built-in bi-colour LED in the positive pole of these batteries. It informs the user about the current charging status (red indicates the charging process / blue means that the battery is fully charged). Due to the lack of memory effect, the batteries can be recharged at any time without negatively affecting their capacity and battery life.
DURABLE AND RELIABLE
The body of the torch is made of a light but very rigid and mechanically durable polymer (polyacetal, POM). This material is highly resistant to environmental factors (highly saline water, UV radiation, high temperature).
The head is moulded with precision from a single piece of aluminium alloy. The alloy used is resistant to corrosion in seawater.
LED STINGRAY VIDEO MARK II is protected by 6mm of tempered glass resistant to scratches and mechanical damage.
HARD ANODISED ALUMINIUM BODY
What is more, the aluminium head of LED STINGRAY VIDEO MARK II is covered with a protective layer of hard anodising. Compared to conventional coatings, the hard anodising coating is much thicker and provides exceptionally high resistance to mechanical damage (e.g. scratching or abrasion), as well as additional protection against corrosion.
All markings and descriptions on the torch are laser-engraved, which makes them durable, easy to read, and aesthetically pleasing, no matter how long the torch is used.
LED STINGRAY MARK II is constructed in such a way that it ensures its safe usage at a depth of up to 200 m.
FLEXIBLE ARMS
Flexible arms are very light, durable and modular construction you can easily extend them by adding the additional corals to extend their reach and make them suit your needs best.
